Mobile Seed Grading Plant (Bolero Type)
More than 15 sold in MP
Description:
The Mobile Seed Grading Plant, commonly referred to as the “Bolero Type”, is a compact and portable unit designed for on-site seed cleaning and grading.
Typically mounted on a pickup van or four-wheel trailer, these units are easily transportable and can be operated in various locations. They are widely used for the processing, grading, and cleaning of a variety of seeds, pulses, and grains, making them ideal for field-level operations and remote agricultural areas.
Salient Features
Specifications
Salient Features
- Use ful for in situ cleaning & grading.
- Cleaning & grading machines made in CNC for better finish.
- Long travel length of screens of cleaner for better cleaning.
- Environment friendly as cleaner provided with cyclone.
Specifications
- Capacity 0.3Ton/Hr
- Plant shall be able to operate on single phase 220 vl 50Hz electricity. An additional provision for taking drive from tractor PTO and operate an alternator shall be given (PTO shaft to be supplied additionally).
- Cleaner cum grader assembly
- Basically the assembly shall be equipped for soybean seed.
- Capacity – At least 300 kg/hr on wheat basis at 12% moisture content.
- Ability – shall be capable to grade commodities wheat, gram, paddy and soybean.
- No. of screens – Each set having minimum 3 screens so that good grain, oversize impurities, under size impurities, scalped impurities. Immature impurities can be separated. Separated outlets shall be provided for each output. One additional set of screens will be provided with the machine.
- Sieve cleaning facility – Balls shall be provided for automatic cleaning of sieve.
- Cyclone dust collector with air trunk.
- Aspiration fan – Shall have-variable air flow control.
- Moisture meter -Compact Universal Digital Data Logging type, steel body construction, resistance-based, moisture range 3.5% to 40% with ±0.2% consistency. Shall have stainless steel test cup with visible arrangement
- Electric control panel – Shall have sufficient meters to measure voltage, current. Proper fuses and safety devices shall be provided to safeguard the plant from voltage and ampere fluctuations.
- Motors – 3 Nos. of motors are needed to run the entire plant. These motor shall be appropriate capacities. Total power requirement will be around 2-3 HP.
- PICKUP VAN
- Payload capacity (RTO ‘passing) Minimum 1 Ton
- Cargo section-. having floor area (where plant will be mounted) of minimum 40 sq. feet with minimum dimension of 5 x 7 feet.
- Engine CC – In the range, of 2000 to 3000 cc.
- Ground clearness – Vehicle has to operate in village so there shall be minimum ground clearance of 150 mm.
- The-pickup van shall have power steering for easy maneuverability.
- Pickup van shall have good fuel efficiency mileage.
- Pickup van shall have closed driver-cabin (front cabin)with seating capacity of atleast driver plus one.