SEEDS/GRAINS CLEANING GRADING EQUIPMENTS

<< Previous Page

Z Type Bucket Elevator 8274

Z Type Bucket Elevator

Seeds/Grains are poured into the input hopper(1). Bucket (8) beneath input hopper carries seeds/grain to the discharge spout (5). Buckets are mounted on the roller chain (3) and powered by geared motor for conveying seeds/grain. The seeds/grain are carried in the buckets gently at low speed and drops into discharge spout without any impact to seeds/grain. Hence these conveyor are used in placed of V.B. Elevator.

SALIENT FEATURES:
  • Suitable for soyabean, mustard and other delicate seeds/grains for gentle handling.
  • Swing type plastic/nylon bucket.
  • Gear motor with gear box.
  • Torque limiter for overload protection.
  • Easy for cleaning, repairs and maintenance.
  • Self lubricant type chain roller for buckets.
  • Easy to assemble and dismantle.

    SPECIFICATIONS:
  • Capacity: 2-10TPH wheat basis.
  • Product carrier : Swing type plastic/nylon bucket (overlap type). 
  • Drive unit motor : 2 HP, 3 phase, 440V flanged mounted with gear box.
  • Overload protection : Torque limiter. 

Vertical Bucket Elevator 6894

Vertical Bucket Elevator

Seeds/Grains are poured into the input feed hopper(1). Buckets (7) collect seeds/grain from input hopper by scooping action and carry seeds to the discharge spout (4). Buckets are fixed on the belt (3) and powered by geared motor for conveying seeds/grain.

SALIENT FEATURES:
  • Economical Model and self cleaning type.
  • Geared motor for better torque.
  • Crowned wheel for improved traction.
  • Branded geared motor used for long life
  • Nylon/HDPE buckets used.

    SPECIFICATIONS:
  • Type of Elevator : Centrifugal Discharge Belt type
  • Material to be handled : Free flowing Granular Material
  • Discharge chute : Provided with soft material coating.
  • Material of Belt : Nylon-Cotton 
  • Material of Bucket : Nylon/HDPE 
  • Drive : Geared Motor
Cat. No. Capacity (on wheat basis) Motor
6893 0.5 Ton/Hr 0.5 HP
6894 1 Ton/Hr 0.5 HP
56894 2 Ton/Hr 1 HP
56895 3 Ton/Hr 1 HP
6897 4 Ton/Hr 1 HP
6898 5 Ton/Hr 1 HP
56897-S 10 Ton/Hr 2 HP
56898-S 15 Ton/Hr 3 HP

Vertical Bucket Elevator 6898-A

Vertical Bucket Elevator

V.B. Elevator to feed seeds to processing machines suitable for Wheat, Paddy etc. with self cleaning type boot section, and discharge spouts, etc.

SALIENT FEATURES:
  • Economical Model and self cleaning type.
  • Geared motor for better torque.
  • Crowned wheel for improved traction.
  • Branded geared motor used for long life
  • Nylon/HDPE buckets used.

    SPECIFICATIONS:
  • Capacity : 6 Ton/Hr. Wheat Basis at standard12% moisture level.
  • Type : Centrifugal Discharge
  • Head, boot and leg casing : 2mm,3mm & 1.6mm steel powder coated paint.
  • Sheet metal parts : CNC punched. 
  • Spouting : 2mm thickness steel sheet powder coated paint. 
  • Bucket Material : HDPE/nylon, with spacer.
  • Belt : Rubberized canvass belt.
  • Belt speed : About 1m/sec. Belt tensioner with steel slide.
  • Head and boot pulley : Crowned & wing type.
  • Discharge height : Meter Delivery Height (MDH) – 6.0 M or As per height of Precleaner on Floor
  • Speed Reduction : By Gear Box of Suitable Gear reduction ratio
  • Gear Motor : Gear motor Elecon/Radicon/Powerbuild/Premium make
  • Elevator Motor : 2 HP 3Phase,440 V Siemens/ Crompton/ABB/or Equivalent make.
  • Construction : Painted / Powder Coated Steel.
  • Accessories : Service Platform, Spouting, input hopper with grating, Ladder discharge valve etc.

Pit Cover : Openable two doors made in Angle frame with MS sheet 2 mm thick and hinges, handle and stair in pit.

Seed Treater 6786

Seed Treater Lab Model

In Order to apply liquid fungicide and insecticide on the outer surface of the seeds, Seed Treater is used.

SPECIAL FEATURES
  • Uniform seed treatment .
  • No damage of seed or untreated seed that reduces crop performance.
  • Sealed treatment of seeds eliminates operator chemical contact or wind blown exposure.
  • High pressure pump working on the principal of Electro Motive Force.
  • Dosing quantity and frequency of dosing of chemical can be varied by simply turning respective knobs of the pump fitted on control panel.
  • The seed mixing drum and pre-mix tank are made of stainless steel.
  • The mixing drum rests on external bearings to facilitate cleaning.

SPECIFICATIONS :
  • Capacity: 100 Kg/Batch (Based on Wheat)
  • Dosing Pump : MD-100 A
  • Motor : ½ HP, 1440 rpm, Three phase
  • Geared Motor : ¼ HP, 30 RPM, Single phase for Chemical Tank
  • Overall size : 1270x700x1885 mm(L x W x H) (approx.)
  • Capacity of Chemical Tank : 20 litres.

Model 6786 8255 8256
Capacity 100kg/Batch 1Ton/Hr 2Ton/Hr
Electric Drive 0.5HP 1HP 2HP

Seed Treater Mist- O - Matic Type 8256-A

Seed Treater Lab Model

In Order to apply liquid fungicide and insecticide on the outer surface of the seeds, Seed Treater is used.

SALIENT FEATURES
  • Fully Automatic Seed Treater with Rotostat Technology, Mist-O-Matic type.
  • Fine and even layer of chemical treatment.
  • PLC controlled sequential controls include timing cycle, calibrated dosing of chemicals and seeds.

SPECIFICATIONS :
  • Seed Treater : Mist-O-Matic type with Rotostat Technology, Volumetric.
  • Capacity : 4.5 to 5 TPH on Wheat Basis.
  • Batch size : 30 to 40 kg.
  • Premix tank : Made of Stainless Steel, 250 Liters capacity.
  • Mixing Chamber Housing : Made of Stainless Steel, SS 304/ Ss306.
  • Rotor : Cast Steel.
  • Peristaltic Pump : With VFD speed control for accurate dosing of chemicals.
  • Chemical Metering : Fully Automatic with PLC, Synchronised with feeding of Seeds.
  • Seed Measuring : Seed feeding calibrated to weigh and feed into mixing chamber. Seeds entering mixing chamber are controlled by high precision sensor.
  • Control Panel : Programmable Logic Controller (PLC) for all sequential controls. It works with VFD which controls the speed of Rotor and Pump. There is a timer setting to set quantity of chemicals and seeds for operator as per requirement through MMI.
  • Power requirement : 10KW, 415V, 3 Φ 50Hz.
  • Air requirement : 5-7 Bar (not in our scope).

Optional:
1. Dry chemical feeding hopper with screw conveyor to feed into mixing chamber is available.
2. Compressor for Seed Treater.

Inclined Flight Belt Pocket Conveyor 8266

Inclined Flight Belt Pocket Conveyor SILENT FEATURES
  • Suitable for soyabean, mustard and other grain.
  • PU cleated belt with side walls.
  • Gear motor with gear box.
  • Separate control panel with variable speed.

SPECIFICATIONS :
  • Capacity : 1 TPH. (for Bulk density 0.78ton/M3)
  • Feeding height : 3ft. (approx.)
  • Feed hopper : 50kg. made of mild steel.
  • Discharge height : 2.8 meter (approx.).
  • Conveyor belt : Modular link belt/cleated belt.
  • Shaft : EN – 8 shaft.
  • Bearing : SKF/NTB bearings.
  • Motor and gear box : 1HP/3Ph/ 440V motor with gear box.
  • Control panel : Separate control panel with variable speed.

Cat. No. Capacity
8265 500Kg/Hr
8266 1 Ton/Hr
8267 2 Ton/Hr
8268 4 Ton/Hr
8269 5 Ton/Hr
8270 10 Ton/Hr

Note: Available in other capacities on request.

Seed Dryer Burner 5830

Seed Dryer Burner SPECIFICATIONS :
  • Indirect fired type seed drier.
  • Highly sensitive thermostat, emergency alarm, solenoid valve, sequence controller.
  • Heating unit provided with all high chimney.
  • Shall have temperature controller system to adjust the temperature.
  • Capacity of drying 200-250 kg/batch.
  • Shall have safe operation and low maintenance.
  • Used to dry grains and seeds.

Also available in capacities of 500kg, 1 ton and 2ton per batch.

Seed Extracting Machine 6956-SS

Seed Extracting Machine SALIENT FEATURES :
  • This machine is used for extraction of vegetable seeds such as Tomato, Brinjal, Chilly, water melon, Squash, Squash melon and Cucumber seeds etc.
  • User friendly machine with very low maintenance cost.
  • Seed Germination is higher with mechanically extracted seeds as compared to manually extracted seeds.
  • Very less time consumed compared to manual extraction.

Note: Output depends upon size of vegetable & seeds.

Electric Control Panel for the Seed Processing Machinery

Seed Extracting Machine

A central electric control panel equipped with main ON and OFF switch, Voltmeter, Change over switch, Ammeter, Phase indicator, Emergency switch, Contactors with protective relays and fuses. (Make L & T, Crompton, Siemens, Anchor, ABB Etc.) All cables make - Polycap and wires - Anchor make.

    SPECIFICATIONS :
  • Display : Clear LED display for voltage and current.
  • Change over switch : Provided to allow easy access to Generator Power.
  • Panel consists of : Voltmeter, Ammeter, Phase indicator, Motor Starter with protective relays, Fuse - 2 Nos. and 15 AMP Socket.
<< Previous Page
Top