IMPORTED SEED LAB EQUIPMENTS

Marvin Seed Analyser (From Gta Sensors Gmbh-Germany)

Marvin Seed Analyser

The seeds are distributed on the measuring surface. A digital camera records the images, and image processing software analyzes the images. The results are displayed in a log table. Using control images, the analysis procedure can be followed. A data export in Excel format is possible. customer and seed-specific software settings can be saved and when you restart call. The analysis carried out transactions in seconds, so that hundreds of semen samples can be analyzed per day. The possible counting errors are less than one percent, an ISTA conformity is achieved. The handling of the device and the operation of the software are simple and easy to learn. Because of the very low wear no regular service is required.

The identification of the sample can be entered manually or read by a handheld scanner.

Visit the Supplier's Website - Click here

INDOSAW is sole representative of GTA Sensors GmbH-Germany equipment in India.

Wall Mount Air Seed Separator (Imported from Seed Tech of USA)

Wall-Mount-Air-Seed-Separator

The Air Separator system uses a pressurized vacuum method to provide high efficiency cleaning and precisely upgrade
separations of various agricultural and industrial products. Its ability to separate less viable and immature seeds, improves the quality of the lot and therefore, enhances seed germination. In addition, the user has the ability to control air flow and feed rate which helps to achieve purity. When seed enters the feed chute, the light, split and broken seed, chaff and other debris are lifted by air flow up through the column and are separated into 2 or 3 batching compartments (depending upon the model).

Specifications :
  • Principle : Pressurized vacuum method.
  • Capacity : 10-50kg per Hour (Depending on product bulk density).
  • Air Control : Through electronic digital drive.
  • Vibration Feeder : Electromagnetic.
  • Portability : Portable through locking wheel.
  • Product movement : Total visibility of all product movement.
  • Two modes of operation : Permanent continuous feed or small lot batch separation (lab model only).
  • Control : Responsive air and product control.
  • Working : Environmental friendly.
  • Power supply : Power Supply 220V, 1ph, 50Hz.

Note :- Higher capacities upto 1.8 ton/hr are also available on request.

Visit the Supplier's Website - Click here

INDOSAW is sole Authorized distributers of Seedtech's Air Seed Separators & Dryers in India.

Wall Mount Air Seed Separators (From Seedtech Systems-USA)

wall-mount-seed-separator
  • Uses a pressurized vacuum method to provide high efficiency cleaning and precise upgrade separations of various agricultural and industrial products.
  • Two modes of operation : permanent continuous feed or
    small lot batch separation (lab model only).
  • Total visibility of all product movement.
  • User friendly.
  • Responsive air and product control.
  • Safety flow relay switch prevents seed contamination.
  • Calibration is fast and simple.
  • Few moving parts.
  • Environmentally clean.
  • Fits into small areas.
  • Portable and locking wheel vacuum system
    (WM2, WM2D & WM3).
  • Capacity : 50 -125 lbs per Hour ( 23 - 56 kg/h).
    (Depending on product density)

Visit the Supplier's Website - Click here

INDOSAW is sole representative of Seedtech equipment in India.

Seed Coating/Pelleting Machine (From SATEC Handelsges. Germany)

Seed Coating/Pelleting Machine
  • Material:
    - Stator made of stainless steel.
    - Rotor of cast iron with Halar Coating.
  • Power Supply:
    - 6500 W, 220/240 V, 50 Hz
    - Motor rotor : 550 W, 680 rpm speed control by frequency converter for infinitely control of rotor rotation
    - Motor spinning disc: 30 W, 1.350 rpm (Adaption to other power supply possible by transformer)
  • Liquid Distribution:
    -Separately switchable spinning disc fixed in the hinged stator - lid.
  • Discharge of Mixing Chamber:
    - Hand - operated discharge door
  • Dimensions:
    - Weight : ca. 66 kg
    - Floor area : 480 mm x 600 mm,
    - Height overall : 750 mm
  • Hinged arm with pelleting disc:
    - For combined operation - coating and pelleting.
  • Automatic liquid dosing with peristaltic pump:
    - Easy adjustment, quick exchange of tubes
    - Capacity: 1.5 - 2140 ml / min (depending on pumphead)
  • Pipe for Peristaltic Pump (per m)
    - Dosing pipe for peristaltic pump
    - Material : Tygon
    - Size : Depending on desired dosing capacity
    In case of interest, please let us have the desired capacity or liquid amounts per 100 kg of seeds.

  • OPTIONAL EQUIPMENT FOR PELLETING:
    Powder dosing unit (stainless steel)
    - Double screw dosing unit K2 MV T20
    - Capacity : 1.6 - 160 dm /h (other capacities on request)
    - Powder hopper stainless steel: 50 dm
    - Stirrer to avoid bridging of materials
    - Mounted at the side of the mixing chamber.
    - Operation by start / stop button.

Customer User List :-
IHBT, Palampur, HP
Bhartiya Krishi Anusandhan Sanstan, New Delhi
Directorate of Seed Research, Mau, UP
CIPHET, Ludhiana, Punjab

Note :- Higher capacities upto 25 ton/hr on wheat basis are also available on request.

Visit the Supplier's Website - Click here

INDOSAW is the sole authorized distributers of SATEC’s Seed Coating / Pelleting machines in India.

Top